Bitumen Emulsion

emulsion ss is particulary designed to delay the setting time to permit mixing with fine aggregates,form a continuous adhesive film without stripping as well as for higher penetration for priming applications. Cationic slow setting emulsion ss made as per astm specification is recommended for application requiring higher stiffiness of residual binder and specifically suited for crack filling along with priming application

The Cationic Bitumen Emulsion is chocolate brown and free-flowing at normal temperature. Once it breaks the bitumen breaks out and color changes to black. An Emulsion is said to break when the organic and the aqueous phase separate into two distinct layers i.e. the dispersion ceases to exist.

RS is specifically designed to have a very fast setting time.its is an ideal binder for all surface dressing and spray application where the road has to be opened for traffic very fast.rapid setting emulsion are characterized by rapiddeposition of binders on contact withroad surface and aggregate and results in early resistance to rain .a rapid setting emulsion reduce ability to mix with aggregates but is ideal for coatng application  

emulsion ss is particulary designed to delay the setting time to permit mixing with fine aggregates,form a continuous adhesive film without stripping as well as for higher penetration for priming applications. Cationic slow setting emulsion ss made as per astm specification is recommended for application requiring higher stiffiness of residual binder and specifically suited for crack filling along with priming application

emulsion ms have moderate setting time,it acts as a goodbinder and is suitable for application like track coat,pre mix carpeting as well as soil stabilization . emuslsion MS has good storage stability under controlled condition.Emulsion MS have moderate viscosity at ambient temperature and is chocalate brown in colour

emulsion ss is particulary designed to delay the setting time to permit mixing with fine aggregates,form a continuous adhesive film without stripping as well as for higher penetration for priming applications. Cationic slow setting emulsion ss made as per astm specification is recommended for application requiring higher stiffiness of residual binder and specifically suited for crack filling along with priming application